OSHA, MSHA, Construction Safety, Hazard Analysis, Business Management Expert Consultant Resume
{/sliders}
Resume of WYS
{/sliders}

  • Construction
  • Steel
  • Safety

BS in Business Management Marshall University

This consultant has provided instruction covering all of the OSHA Standards and MSHA Standards with emphasis on trenching and excavation, underground construction (tunnels), confined space, respirators, scaffolding, fall protection, forklifts, aerial lifts and cranes. Also included are First Aid, CPR and AED training.

Additionally, this expert has consulted on hazard analyses for general industry, construction, and municipalities including writing Safety and Health Programs and putting into play management systems to address these and other hazards.

Consultant, Kevin Kennedy Associates, Indianapolis, IN

Consulting on OSHA and MSHA standards, instruction and training, hazard analysis, and construction evaluation for a wide variety of clients.

Instructor/Consultant, H B Training & Consulting, Atlanta, GA

Instruction covers all of the OSHA Standards and MSHA Standards with emphasis on trenching and excavation, underground construction (tunnels), confined space, respirators, scaffolding, fall protection, forklifts, aerial lifts and cranes. Also included are First Aid, CPR and AED training. NPDES training is authorized by the State of Georgia as the state complies with the various aspects of the Clean Water Act.

Consulting includes doing hazard analyses for general industry, construction, and municipalities including writing Safety and Health Programs and putting into play management systems to address these and other hazards.

Consulting also includes working with clients as they participate in OSHA “informal conferences” or when they contest OSHA decisions at that level and the case progresses on up the through the legal system.

Consulting also includes accident investigations, usually those involving a fatality or catastrophe, working with clients, insurance companies, OSHA and other authorities.

Erection Supervisor, Aluma Systems, Atlanta, GA

Mainly designed scaffolding, shoring and forming systems. Was a project manager/supervisor on the scaffolding of the Noramco Project (a division of Johnson & Johnson) – Athens, GA.

Operations Manager, Safway, Atlanta, GA

Manufacturer’s Representative, Self-Employed, Atlanta, GA

Asst. Manager Safway Steel Products, Atlanta, GA

Assisted in the conversion of a distributorship into a factory branch. This involved every management function at the branch level, and it included putting together scaffold erection, warehouse, and trucking forces. In charge of supervising the scaffolding of power and recovery boilers for Georgia Power, Union Camp, Bowater, and ships for the U.S. Navy in Mayport, FL and Norfolk, VA.

Operations Manager Safway Steel Products, Richmond, VA

Design and supervise scaffolding, shoring and seating projects. Took over the management of the Charleston, WV operation until a permanent manager could be found. Upon returning to Richmond, was instrumental in getting Safway into the Systems scaffolding market. Helped introduce Safway’s power swing into the domestic market.

Project Manager/Supervisor, Safway Steel Products, Richmond, VA

Safway was involved in the concrete forming business, took over several projects. The main one was a five story, one million dollar (by 1972 standards), one block square parking deck for the State of Virginia, a high profile project at the intersection of Broad Street and I-95. The others included a box girder bridge in Roanoke, VA, a high-rise nursing home in Lumberton, NC, and a library in Asheville, NC.

Operations Manager, Safway Steel Products, Richmond, VA

Was responsible for all safety on and off the premises. Scaffolding, shoring, material elevators, Chicago Booms, forklifts, aerial lifts, and skid loaders. Workforce included the mechanics and the scaffold erectors working in several states in many environments. Coordinated efforts with companies like DuPont, Allied Chemical, Hercules Powder, VEPCO, and the U.S. Navy, Army, and Marines.

Assistant Manager, Evans Products, Chesapeake, VA

Was responsible for all safety aspects, which included the shop/yard, forklift operators, truck drivers, and the warehouse force.

Safety Coordinator, Burlington Industries, Vinton, VA

This was a new position in the plant. Selected to head up the program and implement it. OSHA was on the horizon and everybody knew it.

 

Let us quickly locate the best and most qualified expert or expertise you need.

800-700-4944

Full Name*
Please fill in the required field.

Email*
Please fill in the required field.

Phone*
Please fill in the required field.

Company
Please fill in the required field.

Client Need
Please fill in the required field.

Invalid Input

FEATURED CONSULTANT

Peter Habicht, Lead Consultant
Peter specializes in welding and metallurgical engineer with 40 years industry experience in commercial nuclear power plant construction.

CONSULTING OPPORTUNITIES

  • Poly(methylmethacrylate) Manufacturing Operations / Processes Consultants
  • Cell Phone Technologies Expert

RAPID RESPONSE

Our Business Model
At Kevin Kennedy Associates, we’ve revolutionized the consulting business by streamlining the way our clients interact with experts.